Congratulations on your new acrylic calendar! These instructions will guide you through the simple process of securely mounting your calendar to the wall using the provided standoffs.
What's Included:
Before you begin, please ensure you have all the following components:
-
Acrylic Calendar
-
4 Standoff Barrels (the main body of the standoff)
-
4 Standoff Caps (the decorative screw heads)
-
4 Screws (to attach the standoff barrels to the wall)
-
4 Wall Anchors (for drywall installation)
You Will Need:
-
Pencil
-
Phillips Head Screwdriver
-
Drill with 1/4" drill bit if using the included drywall anchors
-
Level (highly recommended for straight installation)
-
Measuring Tape
Installation Steps:
Follow these steps carefully to ensure a secure and level installation:
-
Prepare the Wall:
-
Choose the desired location for your calendar on the wall.
-
Hold the acrylic calendar against the wall in the exact position you want to mount it.
-
Using a pencil, lightly mark the center of each of the four pre-drilled holes on the calendar onto the wall.
-
-
Install Standoff Barrels:
-
For Drywall:
-
Using your drill, drill a 1/4" hole at each of your pencil marks.
-
Gently tap a wall anchor into each drilled hole until it is flush with the wall surface.
-
Take one standoff barrel. Insert a screw through the smaller hole of the barrel.
-
Align the screw with a wall anchor and use your Phillips head screwdriver to screw the barrel firmly into the wall anchor until it is secure. Do not overtighten.
-
-
For Wood Studs (No Anchors Needed):
-
Using your drill, drill a small pilot hole at each of your pencil marks, slightly smaller than the diameter of your screws.
-
Take one standoff barrel. Insert a screw through the smaller hole of the barrel.
-
Align the screw with a pilot hole and use your Phillips head screwdriver to screw the barrel firmly into the wood stud until it is secure. Do not overtighten.
-
-
Repeat this step for all four standoff barrels, ensuring they are securely attached to the wall.
-
-
Mount the Acrylic Calendar:
-
Carefully align the pre-drilled holes on your acrylic calendar with the installed standoff barrels. The calendar should rest flush against the barrels.
-
-
Attach Standoff Caps:
-
Take one standoff cap and screw it clockwise into the threaded end of an exposed standoff barrel, passing it through the hole in the acrylic calendar.
-
Tighten each cap by hand until the calendar is held firmly against the wall. Do not overtighten, as this could damage the acrylic.
-
Tips for Best Results:
-
Measure Twice, Drill Once: Double-check your measurements and use a level before drilling to ensure your calendar is perfectly straight.
-
Cleanliness: Gently wipe your acrylic calendar with a soft, lint-free cloth to keep it sparkling. Never use cleaning products designed for use on windows or any abrasive cleaners.
-
Professional Help: If you are unsure about drilling into your specific wall type, consider consulting a professional.
Enjoy your new, beautifully mounted acrylic calendar!